Dustless Technologies 16006 16-Gallon Dustless Wet Dry Vacuum with Hepa Filter, 12-Foot-by-1-1/2-Inch Hose

Product Details

DUSTLESS TECHNOLOGIES H.E.P.A. Wet/Dry Vacs help recover asbestos, lead dust, and other airborne pollutants. H.E.P.A. vac filtration effectively removes 99.97% of all particles to 0.3 microns. Changes from wet to dry pickup without removing filters. Include: 2 extension wands, crevice tool, utility nozzle, 1 micro prefilter bag, 12' crushproof hose, and 15' cord. Water Lift/Air Flow: 72"/116.59 CFM. 5 hp, 11.5-amp motor. 16-gal. capacity.

Truly HEPA rated
Will NOT expel Dust
Lasts 6 times longer than the competition
Tool set stores on the machine
Suction hose can be used for draining the 16 gallon tank.

The Dustless Technologies 16006 HEPA Vacuum is an amazing value compared to other HEPA vacuums. Not only does it have a low initial cost, but when used with an optional Micro Pre-Filter, you can greatly extend the life of the HEPA filter, saving you even more money down the road. This cost-saving system is only available through Dustless Technologies.

The 16006
HEPA Wet/Dry Vacuum
At a Glance:

Certified HEPA-rated vacuum system
Designed to capture fine dust
Won't release dust back into the environment
No need to change filters for wet vacuuming
100% recommended by Handyman Club of America

Use the Wet/Dry Vac with the optional Dustie Dust Collection Shroud
(sold separately) for controlling dust during hand grinding. View larger.

The certified HEPA filter meets OSHA, EPA and NIOSH guidelines and captures particles down to .3 microns. View larger.

Tested by Handyman Club of America, the 16003 Wet/Dry Vacuum received a 100% approval rating.

HEPA Filtration for a Dust-Free Jobsite
The Dustless Technologies 16006 HEPA Vacuum is designed specifically to protect workers from harmful airborne particles created from sawing and grinding concrete, stone, fiberglass, drywall and other construction materials. Because it is certified, it meets OSHA, EPA and NIOSH guidelines, and it captures particles down to .3 microns.

Vacuums Liquids Without Hassle
Unlike other HEPA vacuums, the 16006 can be used to vacuum up water without fear of getting your valuable HEPA filter wet. The vacuum is designed to keep water away from the HEPA filter and motor. The included 12-foot hose can be used for drainage, and the drain can be regulated to drip or flow freely.

Quiet and Powerful with Convenient Tool Storage
The 16006 emits only 81 decibels of noise and has a powerful motor that produces 23,000 RPM. This means you'll get maximum, consistent suction, even when the vacuum contains 40 pounds of dust and debris.

For further convenience, the 16006 wet/dry vacuum comes with a full set of tools that conveniently store right on the unit, including two extension wands, a crevice tool, and a utility nozzle.

100% Recommended by Handyman Club of America
Tested by Handyman Club of America, the Dustless Technologies 16006 Wet/Dry Vacuum received a 100% approval rating. After using the 16006 in their homes, shops, and jobsites, 13 testers gave the wet/dry vac an overall member rating of 9.3. Performance scored a 10, and rating against similar products was an 8.1.

What's in the Box
Dustless Technologies 16006 Wet/Dry Vacuum, two extension wands, crevice tool, utility nozzle, one micro prefilter bag, 12-foot crushproof hose, and 15-foot cord. This vacuum features on-board tool storage.